GT1356吸水率測試儀（真空法）

檢測項目：

檢測陶瓷磚在真空法條件下的吸水率，以達到檢測陶瓷磚的顯氣孔率和表觀相對密度

GT1356吸水率測試儀（真空法）

Laboratory instrument to establishing the water absorption under vacuum of ceramic tiles with automatic cycles. Vacuum test takes place as follows: lay the tiles onto a suitable grid into the tank; switch on the vacuum pump. By doing so it shall be possible to determine the apparent porosity, the apparent relative density and the absorption of water The instruments was tested to do ISO and ASTM STANDARD WORKS DEPRESSIONS (0 ÷980 - mbar) 

GT1356吸水率測試儀（真空法）

執行標準：

GB/T 3810.3-2006、 GB/T 3810.12-2006、 ISO 10545-3-1995、 ISO 10545-12-1995 、ASTM C-1026-87、 GOST 27180

GT1356吸水率測試儀（真空法）TECHNICAL SPECIFICATIONS

 ?    Vacuum pump for tests UNI EN ISO, ASTM and GOST

 ?    Selection for 2 water level by means of electronic sensor

 ?    Working cycles: ISO, ASTM

 ?    Supply: 230 V - 50 Hz single phase (other voltage on request)

 ?   Time varation of the work cycle phase 

GT1356吸水率測試儀（真空法）配置清單：

1. 真空法吸水率測試儀1臺；

2. 不銹鋼304樣品放置籃2個。